Part No. Manufacturer Description Lead Time Unit Price(USD) In Stock Quantity Operation
ULN2003AIN
Texas Instruments
ULN2003AIN

Lead Time: 9-12Days

-- --
6500
Total: $
LM3480IM3-12/NOPB
Texas Instruments
LDO 30V 100mA 12V

Lead Time: 9-12Days

-- --
8500
Total: $
OPA2187IDR
Texas Instruments
1uV 100pA 550kHz

Lead Time: 9-12Days

-- --
8900
Total: $
DRV8212PDSGR
Texas Instruments
PWM 1.65V~5.5V 4A

Lead Time: 9-12Days

-- --
700
Total: $
OPA2196IDR
Texas Instruments
OPA2196IDR

Lead Time: 9-12Days

-- --
7900
Total: $
TPS73250DBVR
Texas Instruments
PMIC---1--250mA-SOT-23-5

Lead Time: 9-12Days

-- --
7900
Total: $
TL081IP
Texas Instruments
FET 13V/us 3mV 30pA 3MHz

Lead Time: 9-12Days

-- --
7300
Total: $
TXB0104DR
Texas Instruments
/ TXB0104DR

Lead Time: 9-12Days

-- --
3100
Total: $
TXU0304RUTR
Texas Instruments
/ TXU0304RUTR

Lead Time: 9-12Days

-- --
500
Total: $
TLV2316IDR
Texas Instruments
TLV2316IDR

Lead Time: 9-12Days

-- --
1500
Total: $
TLV75718PDRVR
Texas Instruments
LDO 5.5V 1A 1.8V

Lead Time: 9-12Days

-- --
1700
Total: $
SN74CBTD3306CDR
Texas Instruments
The SN74CBTD3306C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r; ), allowing for minimal propagation delay. This device features an integrated diode in series with V; to provide level shifting for 5-V input down to 3.3-V output levels. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBTD3306C provides protection for undershoot up to –2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.; The SN74CBTD3306C is organized as two 1-bit bus switches with separate output-enable (1OE, 2OE) inputs. It can be used as two 1-bit bus switches or as one 2-bit bus switch. When OE is low, the associated 1-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the associated 1-bit bus switch is OFF, and a high-impedance state exists between the A and B ports.; This device is fully specified for partial-power-down applications using I; . The I; feature ensures that damaging current will not backflow through the device when it is powered down.; To ensure the high-impedance state during power up or power down, OE should be tied to V; through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the

Lead Time: 9-12Days

-- --
3100
Total: $
SN65HVD10DR
Texas Instruments
RS-485/RS-422 SN65HVD10DR

Lead Time: 9-12Days

-- --
3300
Total: $
LMR33620ADDAR
Texas Instruments
DC-DC 3.8V~36V 1V~24V

Lead Time: 9-12Days

-- --
100
Total: $
ISO1044BDR
Texas Instruments
IC

Lead Time: 9-12Days

-- --
3500
Total: $
INA241A3IDDFR
Texas Instruments
-5-V to 110-V bidirectional ultraprecise current sense amplifier with enhanced PWM

Lead Time: 9-12Days

-- --
3700
Total: $
ISO6742FDWR
Texas Instruments
IC: interface; digital isolator; 50Mbps; SMD; SO16; Ch: 4;

Lead Time: 9-12Days

-- --
4700
Total: $
TLV9001TIDCKR
Texas Instruments
2V/us 5pA 1MHz

Lead Time: 9-12Days

-- --
6100
Total: $
LMV722IDR
Texas Instruments
LMV722IDR

Lead Time: 9-12Days

-- --
6300
Total: $
MSPM0G3507SPTR
Texas Instruments
80MHz Arm M0+ MCU, 128KB Flash, 32KB SRAM, 2×12bit 4Msps ADC, DAC, 3×COMP, 3×op-amp, CAN-FD,

Lead Time: 9-12Days

-- --
6500
Total: $
  • 1
  • 860
  • 861
  • 862
  • 863
  • 864
  • 6854
Go to