
| Part No. | Manufacturer | Description | Lead Time | Unit Price(USD) | In Stock | Quantity | Operation |
|---|---|---|---|---|---|---|---|
LM3480IM3-12/NOPB
| Texas Instruments |
LDO 30V 100mA 12V
| Lead Time: 9-12Days | -- -- | 8500 | Total:
$
| |
OPA2187IDR
| Texas Instruments |
1uV 100pA 550kHz
| Lead Time: 9-12Days | -- -- | 8900 | Total:
$
| |
DRV8212PDSGR
| Texas Instruments |
PWM 1.65V~5.5V 4A
| Lead Time: 9-12Days | -- -- | 700 | Total:
$
| |
OPA2196IDR
| Texas Instruments |
OPA2196IDR
| Lead Time: 9-12Days | -- -- | 7900 | Total:
$
| |
TPS73250DBVR
| Texas Instruments |
PMIC---1--250mA-SOT-23-5
| Lead Time: 9-12Days | -- -- | 7900 | Total:
$
| |
TL081IP
| Texas Instruments |
FET 13V/us 3mV 30pA 3MHz
| Lead Time: 9-12Days | -- -- | 7300 | Total:
$
| |
TXB0104DR
| Texas Instruments |
/ TXB0104DR
| Lead Time: 9-12Days | -- -- | 3100 | Total:
$
| |
TXU0304RUTR
| Texas Instruments |
/ TXU0304RUTR
| Lead Time: 9-12Days | -- -- | 500 | Total:
$
| |
TLV2316IDR
| Texas Instruments |
TLV2316IDR
| Lead Time: 9-12Days | -- -- | 1500 | Total:
$
| |
TLV75718PDRVR
| Texas Instruments |
LDO 5.5V 1A 1.8V
| Lead Time: 9-12Days | -- -- | 1700 | Total:
$
| |
SN74CBTD3306CDR
| Texas Instruments |
The SN74CBTD3306C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r; ), allowing for minimal propagation delay. This device features an integrated diode in series with V; to provide level shifting for 5-V input down to 3.3-V output levels. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBTD3306C provides protection for undershoot up to –2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.; The SN74CBTD3306C is organized as two 1-bit bus switches with separate output-enable (1OE, 2OE) inputs. It can be used as two 1-bit bus switches or as one 2-bit bus switch. When OE is low, the associated 1-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the associated 1-bit bus switch is OFF, and a high-impedance state exists between the A and B ports.; This device is fully specified for partial-power-down applications using I; . The I; feature ensures that damaging current will not backflow through the device when it is powered down.; To ensure the high-impedance state during power up or power down, OE should be tied to V; through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the
| Lead Time: 9-12Days | -- -- | 3100 | Total:
$
| |
SN65HVD10DR
| Texas Instruments |
RS-485/RS-422 SN65HVD10DR
| Lead Time: 9-12Days | -- -- | 3300 | Total:
$
| |
LMR33620ADDAR
| Texas Instruments |
DC-DC 3.8V~36V 1V~24V
| Lead Time: 9-12Days | -- -- | 100 | Total:
$
| |
ISO1044BDR
| Texas Instruments |
IC
| Lead Time: 9-12Days | -- -- | 3500 | Total:
$
| |
INA241A3IDDFR
| Texas Instruments |
-5-V to 110-V bidirectional ultraprecise current sense amplifier with enhanced PWM
| Lead Time: 9-12Days | -- -- | 3700 | Total:
$
| |
ISO6742FDWR
| Texas Instruments |
IC: interface; digital isolator; 50Mbps; SMD; SO16; Ch: 4;
| Lead Time: 9-12Days | -- -- | 4700 | Total:
$
| |
TLV9001TIDCKR
| Texas Instruments |
2V/us 5pA 1MHz
| Lead Time: 9-12Days | -- -- | 6100 | Total:
$
| |
LMV722IDR
| Texas Instruments |
LMV722IDR
| Lead Time: 9-12Days | -- -- | 6300 | Total:
$
| |
MSPM0G3507SPTR
| Texas Instruments |
80MHz Arm M0+ MCU, 128KB Flash, 32KB SRAM, 2×12bit 4Msps ADC, DAC, 3×COMP, 3×op-amp, CAN-FD,
| Lead Time: 9-12Days | -- -- | 6500 | Total:
$
| |
LMV324IPWRG4
| Texas Instruments |
1V/us 15nA 1MHz
| Lead Time: 9-12Days | -- -- | 6700 | Total:
$
|